TiLite ZRA Rigid Titanium Wheelchair

Frame Style:

Z2FS2 – ZRA Titanium Frame Upgrade (Full Adjustability. 265 Pound Weight Limit. Weight Limit is restricted to 150 pounds on chairs with Rear Seat Width A and Seat Depth B from 10”x10” to 12”x12”.)

Frame Options:

Anodized Colors:
Color Anodize Package includes: Aluminum Camber Tube, Camber Mount, Footrest Clamp, Caster Mount, Caster Fork, and Caster Cap. If no anodize color is selected, the default will be black.

Rear Seat Height (A):
Measure from outside of seat tube at back post to the outside of the opposite seat tube at back post.

Front Seat Width: (T)
Measure from inside of front frame tube to inside of opposite front frame tube.

Seat Depth: (B)
Measure from front of back post to the front edge of seat sling. Front edge of seat sling will be at the beginning of the bend at front of chair frame, unless Frog Legs® or 90° Front Angle is ordered, in which case front edge of seat sling begins approximately 1” behind the bend.

Ergonomic Seat: (U)
ZRA Ergonomic Seat (Center of Gravity adjustment may be affected by this option. Not available with V-Front or Seat Taper, Seat Back that Locks When Folded, Desk Arms, Depth Adjustable Backrests, Fold Down Rigid Sideguards, Solid Seat, Tension Adjustable Bolt On Seat Upholstery, or the Curve cushion. Free upgrade to Tension Adjustable by Straps Seat Upholstery included.)

Frame Depth:

Front Seat Height: (C)
Measure from floor to top of seat tube at beginning of bend. ZRA adjusts up and down in 1/2” increments.

Rear Seat Height: (D):
Measure from floor to top of seat tube at back post. ZRA adjusts up and down in 1/2” increments.

Front Angle (L) or Overall Frame Length (M)

Select one. If Overall Frame Length is selected, front angle will be bent to achieve requested length.

Front Angle (L) – Measure from frame front to floor.

Overall Frame Length (M) – Measure from front of backrest to Front Edge of Footrest.

Seat to Footrest: (E)
Measure from front edge of seat sling to top rear of footrest. Measurement must be at least 2” shorter than Front Seat Height (C).

Footrest Width:

Push Handles:

Seat Back Height: (F)

Backrest Rigidizer Bar:

ZSB12 – 4” Deep Backrest Rigidizer Bar (Required for Heavy Duty Frame. Available with Aluminum backrest option. Not available with a Non-Folding, Fixed Height Titanium Seat Back type. 4” Deep Rigidizer Bar is NOT a rounded style rigidizer bar.) NCO

ZSB16 – Depth Adjustable Back/Frame (Seat Depths B of 10”-18” allow 2” of rearward adjustment. Height Adjustable Push Handles have a limited Height range with Depth Adjustable Back. Not Available with 19” or 20” Seat Depths B, Heavy Duty Edition, Tension Adjustable by Straps Seat Upholstery or Carbon Fiber Side Guards) NCO

Z2SB13 Custom Height Backrest Rigidizer Bar (The Standard Rigidizer Bar height is 5” above the Seat Sling for a short, 6” for a medium and 10” for a tall. Custom Height Rigidizer Bar must be at least 4-1/2” above Seat Sling. Maximum Height is 3” less than Lowest Seat Back Height.) $150 Set at:___________(Use 1/4” increments)

Seat Back Angle: (G)
Measure angle from front of back post to floor. 90° will be perpendicular to the floor. To approximate the angle from the back post to the seat, subtract 2 degrees from measurement (G) for every 1/2” of dump.

Center of Gravity: (H)
Measure from front of back post at the seat tube to the center of the rear axle. If no center of gravity is selected, chair will ship with the center of gravity in the rearward-most position.

Rear Wheel Spacing: (J)
Measure from outside of seat back post to inside of rear tire. 3/4” Rear Wheel Spacing not available with 0° or 2° Camber (K).

Camber: (K)

Casters:

Front Forks:

Axles:

Rear Tires:

Handrims:

Wheel Locks:

Side Guards:

Armrests:

Z2ARM1 Swing Away Tubular – Not available with Depth Adjustable Back/Frame or Aluminum Frame Transit Tie-Down.

Z2ARM4 Swing Away – Flip Back Tubular – Not available with Aluminum Frame Transit Tie-Down.

Z2ARM2 Removable Height Adjustable Desk Arm with Rigid Side Guard – Not available with Depth Adjustable Back/Frame unless Aluminum Frame Transit Tie-Down is selected. Requires 14” minimum Seat Depth (B).

Z2ARM3 Removable Height Adjustable Desk Arm with Rigid Side Guard and Transfer Loop – Not available with Depth Adjustable Back/Frame unless Aluminum Frame Transit Tie-Down is selected. Requires 14” minimum Seat Depth (B).

Anti-Tips: