Varilite Icon Back – Deep

Stock# VIB-Deep-J

Retail: $845.00Cost: $633.75

    Price isn’t all that matters when you are considering buying Varilite Icon Back – Deep, excellent customer service is priceless!

    Icon™ Deep Back is a very effective lightweight wheelchair cushion for users who need a Deeper trunk support and the full adjustment capability of a larger style of back. With an unrestricted upper body, you can get a full range motion of the upper body and trunk, and improves Activities of Daily Living. The shell curves around the sides of the body for mild lateral support, while the accompanying enhanced rollover cushion protects the user and provides maximum comfort. Adjusting Angle, Depth, Width and Height of Icon™ Back System hardware is simple and easy. All adjustment screws are accessible from the rear of the back support or from the outside of the Cane Brackets. Adjustments can be made while the user is in the wheelchair. Operating the system is as easy as opening the latches and sliding the back support out of the hardware. Latches stay in an open position until the back is removed, making it simple to remove the support with one hand or limited dexterity. The hardware guides the back support into position with minimal effort and locks it securely into place. Red safety markings alert the user that a latch is open and not in the locked position. The Icon™ Back System incorporates a VARILITE® air-foam floatation cushion, and features an innovative rollover cushion to protect the user from contact with the edge of the shell during extension or weight shifting activities. Sculpted foam fits the shell contour without bunching. Multi-stiffness foam is thickest along the vertebral column. Soft foam protects the sensitive areas of the spine while firmer foam supports the sides of the trunk. A two-way air valve allows air in and out of the cushion for a custom fit and adjustable comfort.

    Choose Your Options:

    In stock

    Retail: $845.00Cost: $633.75

    Ask a question about this productOne or more required fields are missing. Please check your selections above.

    Reviews

    There are no reviews yet.

    Your Review

    Size Chart

    Icon™ Deep Back Measurement

    Points of Measurement

    A. back height (shell only, rollover cushion can add 1.5 in to overall height)

    B. bottom of back to beginning of vertical slot

    C. bottom of back to top of vertical slot

    D. range of Icon™ hardware adjustment in vertical slot

    E. outside width of shell

    F. inside width of support surface

    G. height of fixed lateral support

     

    Size Chart and Fit Information

    When
    choosing an Icon™ Back System, consider the widths of the wheelchair,
    the back shell and the support surface, plus the type of laterals.

    Icon™ Deep Back

    Size Fits Wheelchair Widths
    14 13″- 15″
    15 14″- 16″
    16 15″- 17″
    17 16″- 18″
    18 17″- 19″
    20 19″ – 21″

    Icon™ Deep Back

    Size A B C D E F G
    Back Height (shell only; cushion can add 1.5 in.) Bottom of back to bottom of slot Bottom of back to top of slot Range of hardware adjustment Outside width of shell Inside width of support surface Height of fixed lateral support
    14 17.0″ 2.5″ 9.5″ 3.5″ 12.6″ 11.8″ 11.6″
    15 18.2″ 2.5″ 10.5″ 4.5″ 14.3″ 13.5″ 12.6″
    16 19.4″ 3.0″ 11.0″ 4.5″ 15.3″ 14.5″ 13.6″
    17 20.5″ 3.0″ 11.0″ 4.5″ 16.3″ 15.5″ 14.3″
    18 21.75″ 3.5″ 11.5″ 4.5″ 17.4″ 16.6″ 15.0″
    20 23.6″ 3.5″ 11.5″ 4.5″ 19.6″ 18.8″ 16.2″

    Specifications

    Cushion Composition Air-Foam Floatation
    Shell Composition Aluminum
    Hardware Composition Metal
    Hardware Type Adjustable
    Weight 6.4 lbs. (18 in.) (includes all hardware)
    Max User Weight 300 lbs.
    Cover Type Mesh
    Valve Type Standard
    Maintenance Once a week, allow your VARILITE cushion to fully inflate overnight with all valves open.
    Warranty 2 Years, excluding cushion cover

    Detailed Description

    Icon™ Deep Back is an
    ideal lightweight solution for users needing Deeper trunk support and
    the full adjustment capability of a larger style of back. The upper
    body is unimpeded, which allows full range motion of the upper body and
    trunk, and improves Activities of Daily Living. The shell curves around
    the sides of the body for mild lateral support, while the accompanying
    enhanced rollover cushion protects the user and provides maximum
    comfort.

     

    Built with the user, caregiver, clinician and technician in mind,
    the Icon™ Mid Back System provides the best solution for those who
    demand fast installation, adjustment versatility, and simple operation.
    The Icon™ Mid Back attaches to the wheelchair using innovative
    adjustable hardware, and includes a VARILITE® air-foam floatation cushion for superior comfort.

     

    Operating the system is as easy as opening the latches and sliding
    the back support out of the hardware. Latches stay in an open position
    until the back is removed, making it simple to remove the support with
    one hand or limited dexterity. The hardware guides the back support
    into position with minimal effort and locks it securely into place. Red
    safety markings alert the user that a latch is open and not in the
    locked position.

     

     

    Icon™ Hardware and Shell

    The Icon™ Back System installs on a wheelchair quickly and easily.
    Only two parts need to be attached to the wheelchair – all other
    hardware components are pre-installed. All adjustment screws are the
    same. Only a single tool is needed. Icon™ hardware is symmetrical and
    provides a wide range of seat depth adjustment, without any need for
    special, extra length parts. Posterior seat depth can be increased or
    anterior depth decreased by reversing the hardware.

     

    Adjusting Angle, Depth, Width and Height of Icon™ Back System
    hardware is simple and easy. All adjustment screws are accessible from
    the rear of the back support or from the outside of the Cane Brackets.
    Adjustments can be made while the user is in the wheelchair.

     

    Once adjusted, Icon hardware stays in place. Cane Brackets clamp
    securely and will not slip. The innovative Adjuster Plate mechanism for
    recline adjustment is positive locking to prevent the back support from
    moving during Activities of Daily Living or other times when heavy
    loads are placed on it.

     

    Operating the system is as easy as opening the latches and sliding
    the back support out of the hardware. Latches stay in an open position
    until the back is removed, making it simple to remove the support with
    one hand or limited dexterity. The hardware guides the back support
    into position with minimal effort and locks it securely into place. Red
    safety markings alert the user that a latch is open and not in the
    locked position.

     

     

    Rollover Cushion

    The Icon™ Back System features an innovative rollover cushion to
    protect the user from contact with the edge of the shell during
    extension or weight shifting activities. The cushion is secured inside
    the cover so it stays in place. The wheelchair user can perform
    Activities of Daily Living with confidence and in comfort. Icon™ Mid
    Back includes an enhanced rollover cushion. Special padding in the
    cover provides extra protection. The Icon™ Back System incorporates a VARILITE®
    air-foam floatation cushion. Sculpted foam fits the shell contour
    without bunching. Multi-stiffness foam is thickest along the vertebral
    column. Soft foam protects the sensitive areas of the spine while
    firmer foam supports the sides of the trunk. A two-way air valve allows
    air in and out of the cushion for a custom fit and adjustable comfort.

     

     

    Breathable Fabric

    Spacer knit fabric on the outside of the cover increases air-flow
    between the user and the back support. Reticulated foam sewn under the
    spacer knit fabric provides additional air exchange plus pressure
    distribution The Icon™ Back System cover meets ISO 7176-16 ignition
    resistance standard for upholstered wheelchair components. The cover is
    machine washable.

     

     

    Thoracic Supports and Accessories

    VARILITE® PAL™ Swing-Away Thoracic supports are designed to
    complement the Icon™ Mid Back. PAL™ (Positive Action Lateral) supports
    allow hinge angle, pad rotation, and horizontal pad adjustments for a
    precise fit. All PAL™ swing-away lateral supports include a neoprene
    protective cover that attaches easily to the PAL™ push button hinge.
    Fixed lateral supports are available for situations when a swing-away
    lateral is not required. Fixed lateral supports consist of shell
    bracket, pad bracket and pad.

     

    Users who need extra support for correct positioning can utilize
    the PSIS Block or Supplemental Lateral Supports attached to the shell
    of their Icon™ Back System. These supports can be positioned within the
    shell using hook and loop attachment. The PSIS Block and Supplemental
    Lateral Supports can be added as an accessory to any Icon™ Back System.
    The PSIS (posterior superior iliac spine) Block provides support to the
    sacrum at the PSIS level, promoting anterior pelvic tilt and spinal
    extension. The Supplemental Lateral Pads help users who lean to one
    side maintain an upright position.

     

    Users needing extra coverage between the back support and
    wheelchair seat can purchase a modesty kit that attaches to the shell
    of the back system and the seat of the wheelchair. Modesty kits provide
    extra coverage for the user, while appearing integrated into the back
    support.