TiLite Aero T Rigid Aluminum Wheelchair

Frame Options:

Color Anodized Package:

Color Anodize Package includes: Aluminum Camber Tube (Anodized Color not available with Power Adaptable Frame), Camber Clamp, Footrest Clamp and Caster Fork. If no anodize color is selected, the default will be black.)

Seat Width (A):

Measure from outside of seat tube at back post to the outside of the opposite seat tube at back post.

Front Seat Width (T):

Measure from inside of front frame tube to inside of opposite front frame tube. (Required with V-Front End V. Not Available with Standard Front End I.)

Seat Depth (B):

Measure from front of back post to the front edge of seat sling. Front edge of seat sling will be at the beginning of the bend at front of chair frame, unless Frog Legs® or a 90º Front Angle is ordered, in which case front edge of seat sling begins approximately 1” behind the bend.

Ergonomic Seat: (U)
Aero T Ergonomic Seat (Not available with V-Front or Seat Taper, Seat Back that Locks When Folded, Desk Arms, Depth Adjustable Backrests, Fold Down Rigid Sideguards, Fendered Adjustable Sideguards, Solid Seat, Tension Adjustable Bolt On Seat Upholstery, or the Curve cushion. Free upgrade to Tension Adjustable by Straps Seat Upholstery included.)

Front Seat Height (C):

Measure from floor to top of seat tube at beginning of bend. Aero T adjusts up and down in 1.2″ increments.

Rear Seat Height (D):

TFA2 – Front Angle (L): – Measure from frame front to floor.

TFA2 – Overall Frame Length (M) – Measure from front of backrest to Front Edge of Footrest.

Seat to Footrest (E):

Measure from front edge of seat sling to top rear of Footrest. Measurement must be at least 2” shorter than Front Seat Height “.

Due to current supplier issues, titanium footrest options will use aluminum tubing instead of titanium and will be powder coated Black Lava. During this time, these options will be available in aluminum at no charge to our customers. If a titanium footrest is desired at a later point, the option will be offered at on-chair pricing when available.

Footrest Width (I):

Tension Adjustable by Straps – Padded Nylon (Required w/Aluminum Fendered Side Guards and Fold-Down Push Handles)

Tension Adjustable by Straps – AIR Breathable Upholstery (n/a w/Ultrasuede Backrest Stripe)(Required w/Aluminum Fendered Side Guards and Fold-Down Push Handles)

Seat Back Type:

Backrest Rigidizer Bars:

TSB12 – 4” Deep Backrest Rigidizer Bar (Available with Aluminum backrest option. Not available with a Non-Folding, Fixed Height Titanium Seat Back Type.4” Deep Rigidizer Bar is NOT a rounded style rigidizer bar.) NCO

TSB13 – Custom Height Backrest Rigidizer Bar (The Standard Rigidizer Bar height is 5” above the Seat Sling for a short, 6” for a medium and 10” for a tall. Custom Height Rigidizer Bar must be at least 4-1/2” above Seat Sling. Maximum Height is 3” less than Lowest Seat Back Height without push handles.) $165 Set at:___________(Use 1/4” increments)

Back Height (F):

Seat Back Angle (G):

Measure angle from front of back post to floor.

Center of Gravity (H):

Measure from front of back post at the seat tube to the center of the rear axle. If no center of gravity is selected, chair will ship with the center of gravity in the rearward-most position.

Rear Wheel Spacing (J):

Measure from outside of seat back post to inside of rear tire. .75” Rear Wheel Spacing not available with 0° or 2° Camber (K).

Camber (K):

Rear Wheel Type:

TRW9 New Spinergy Design Lab LX Wheels (If same color is selected, anodized hubs and rims match color anodized package above.
Available with black spokes only.)

TRW16 New Spinergy Carbon Blade with 3k Carbon Fiber (Not available with Heavy Duty Frame.)

Titanium Quick Release (n/aTiLite High Flange Hub, TWIN-STAR Exchange, DASH, SHADOW, Mags, 26″(590) Spinergy SPOX or LX Rear Wheels or Power Adaptable Frame)

Quad Release (n/a w/Mags or 26”(590) Spinergy Spox or LX Rear Wheels)