TiLite X Folding Aluminum Wheelchair

Transit Tie-Down Consists of four tie-down brackets. Not available with heavy duty frame, fixed height non-removable armrest or swing away
tubular armrest. Please refer to user manual for important information regarding Transit Tie-Down option.

Transport Bracket Option Consists of four tie-down brackets. Unoccupied use only. Not available with heavy duty frame, fixed height nonremovable armrest or swing away tubular armrest

Seat Width ‘A’ : Measure from outside of seat tube at back post to the outside of the opposite seat tube at back post.

Seat Depth ‘B’: Measure from front of back post to the front edge of seat sling. For odd size seat depths, frame depth with be 1” longer than seat
sling. Seat upholstery is 1” less than seat depth and begins 1” after front edge of back post

Front Seat Height ‘C’: Measure from floor to top of seat tube at front edge of seat sling

Rear Seat Height ‘D’: Measure from floor to top of seat tube at back post.

Measure from front of back post at the seat tube to the center of the rear axle.

Distance from front edge of seat sling to top rear of footrest. Must be at least 2” shorter than Front Seat Height.

• Composite Flip-up Footrest
• Depth & Angle Adjustable Footrest – 7″-8.5″ will receive 3″ extension tube & 9″-10″ will receive 5″ extension tube

When choosing a single ELR, please select the opposite hanger above. Not available with 14” seat width.

(measure from front edge of seat sling to top rear of ELR footrest – Not available with 14” seat width)

Rear Wheel Type:

(See rear seat height ranges chart for rear seat height ‘D’ limitations.)

XOAD1 – One Arm Drive System – Available with 24” mag wheels and standard aluminum handrim only. Rear seat height, camber or
axle restrictions may apply. Install on Left or Right.

XRW14 – TiLite SHADOW Rear Wheel – Select size. 25” and 26” wheels require 15” minimum seat depth.

-22” (501) 24” (540) 25” (559) 26” (590)

XRW7 – Spinergy SPOX Rear Wheel – Select size and spoke color. 25” and 26” wheels require 15” minimum seat depth.

-22” (501) 24” (540) 25” (559) 26” (590)
-Black Red Blue White Green

XRW8 – Spinergy LX Rear Wheel – Select size and spoke color. 25” and 26” wheels require 15” minimum seat depth. Only available with heavy
duty frame when 0° or 2° camber is selected.

-22” (501) 24” (540) 25” (559) 26” (590)
-Black Red Blue White Orange Pink Purple Green

ZRW9 –  Spinergy – Design Lab LX Rear Wheel Black spokes only. Select size and anodizing color. 25” and 26” wheels require 15” minimum seat
depth.

-22” (501) 24” (540) 25” (559) 26” (590)
-Gold Green Blue Red Purple Orange

XRW16 – Spinergy Carbon Blade Rear Wheel – Select size. Not available with heavy duty frame. 25” wheels require 15” minimum seat depth.

-24” (540) 25” (559)

XRW17 – X-Core Mag (Not available with Heavy Duty Frame, Short Tabs, Quad Release Axles or Spoke Guards. Available with Aluminum Sliver Anodized Handrims only.)

-22”(501) 24”(540)

Seamless power assist experience

Pushing a manual wheelchair can put stress on the upper body and lead to serious issues in the future. SmartDrive gives you freedom to do more. It moves with you and it’s so lightweight, you don’t even know it’s there. You can spin in place, be in a wheelie, or hop off curbs. Empower your active lifestyle. Take the strain off your shoulders—without slowing down.

SmartDrive offers a range of controls to deliver a seamless power assist experience, providing opportunity for 80% fewer pushes. SmartDrive was created with manual wheelchair users in mind. The mounting location, the ergonomic handle, the weight, and the OmniWheel were all designed to give manual wheelchair user access to fewer pushes.

PushTracker E3 Upgraded processor and improved battery life, with a set-up that takes just minutes The PushTracker E3 takes everything that was good about the PushTracker E2 and makes it better! It comes with increased memory and an upgraded processor, which bring battery life improvements and make the PushTracker more reliable than ever. Navigating the SmartDrive MX2+ App is easier thanks to the responsiveness of the PushTracker E3. Experience a quick setup in under 5 minutes with no phone or Wi-Fi required. With gesture-activated controls, you can start your SmartDrive with a simple tap of your hand—no pushing or reaching necessary! Download the SmartDrive MX2+ app from Google Play

Original PushTracker™ The original PushTracker was the first of its kind, introducing Bluetooth technology and tap gestures to the world as a way of controlling the device. Tap gestures allow you to control the SmartDrive without having to push the wheel to start and SwitchControl can still be used in combination. The original PushTracker is great for those who want or need a simpler wearable choice to control their SmartDrive. Fine tune your performance and keep everything up to date using the new PushTracker App.

SmartDrive MX2+ App, now on Apple Watch! You asked, we listened; SmartDrive MX2+ is now compatible with Apple Watch! Easily control your SmartDrive with tap gestures, change settings, and track distances and battery levels right from your wrist. Enjoy full access to your Apple Watch and experience best-in-class battery performance when using it with your SmartDrive. Already have an Apple Watch? Download the SmartDrive MX2+ app FOR FREE from the Apple App Store. SmartDrive MX2+ App for Apple Watch is compatible with Apple Watches Series 5 and newer running watchOS 8 or newer.

SwitchControl Now Comes Standard